Apc Smart-UPS Vt 10kva 400v W/ 1 Battery Module Exp To 4, Start-up 5x8

 Without VATWith VAT
Base Price:€15.495,65€18.749,74
Recupel:+ €0,30+ €0,36
BeBat:+ €0,08+ €0,10
Part Number: SUVTP10KH1B4S
Language: UK
Minimum Order Quantity: 1


Compact 3-phase power protection with scalable runtime for small data centers and other business critical applications


  • Availability
    • Dual mains input
      Increases availability by allowing the UPS to be connected to two separate power sources.
    • Scalable runtime
      Allows additional run time to be quickly added as needed.
    • Hot-swappable batteries
      Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    • Generator compatible
      Ensures clean, uninterrupted power to protected equipment when generator power is used.
    • Automatic internal bypass
      Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
    • Battery modules connected in parallel
      Delivers higher availability through redundant batteries.
  • Serviceability
    • User-replaceable batteries
      Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
    • Battery replacement without tools
      Allows quick, easy battery replacement.
    • Automatic self-test
      Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Shippable with modules installed
      Enables pre-installation UPS staging and testing and faster installation.
    • Modular design
      Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
  • Manageability
    • Network manageable
      Provides remote management of the UPS over the network.
    • InfraStruXure Manager Compatible
      Enables centralized management via the APC InfraStruXure Manager.
    • LCD display
      Alpha-Numeric Display which displays system parameters and alarms.
    • Audible alarms
      Provides notification of changing utility power and UPS conditions.
    • Programmable frequency
      Ensures compatibility with different input frequencies.
    • LED status indicators
      Quickly understand unit and power status with visual indicators.
    • SmartSlot
      Customize UPS capabilities with management cards.
  • Total Cost of Ownership
    • Input power factor correction
      Minimizes installation costs by enabling the use of smaller generators and cabling.
    • Temperature-compensated battery charging
      Prolongs battery life by regulating the charge voltage according to battery temperature.
    • Manual maintenance bypass
      Reduces installation costs by eliminating the need for an external mechanical bypass.
    • Intelligent battery management
      Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Protection
    • Frequency and voltage regulation
      Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
    • Safety-agency approved
      Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
    • Cold-start capable
      Provides temporary battery power when the utility power is out.


  • Output
    • Output Power Capacity: 8000 Watts / 10 kVA
    • Max Configurable Power: 8000 Watts / 10 kVA
    • Nominal Output Voltage: 230V,400V 3PH
    • Output Voltage Note
      Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
    • Efficiency at Full Load: 95%
    • Output Voltage Distortion: Less than 5% at full load
    • Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal
    • Crest Factor: Unlimited
    • Waveform Type: Sine wave
    • Output Connections
      • (1) Hard Wire 4-wire (3PH + G)
      • (1) Hard Wire 5-wire (3PH + N + G)
      • (1) Screw Terminals
    • Bypass: Built-in Maintenance Bypass,Built-in Static Bypass
  • Input
    • Nominal Input Voltage: 400V 3PH
    • Input Frequency: 47 - 70 Hz (auto sensing)
    • Input Connections: Hard Wire 5-wire (3PH + N + G)
    • Input voltage range for main operations: 304 - 477V
    • Other Input Voltages: 380,415
    • Maximum Input Current: 14A
    • Input Breaker Capacity: 20A
    • Batteries & Runtime: Battery Type: VRLA
    • Included Battery Modules: 1
    • Available Battery Slots: 3
    • Typical recharge time: 5 hour(s)
    • RBC Quantity: 1
    • Typical Backup Time
      at Half Load:  18.1 minutes (4000 Watts)
    • Typical Backup Time
      at Full Load:  5.5 minutes (8000 Watts)
  • Communications & Management
    • Interface Port(s): DB-9 RS-232,Smart-Slot
    • Pre-Installed SmartSlot Cards: AP9619
    • Control panel: Multi-function LCD status and control console
    • Audible Alarm: Audible and visible alarms prioritized by severity
    • Emergency Power Off (EPO): Yes
  • Physical
    • Maximum Height: 1499.00 mm
    • Maximum Width: 559.00 mm
    • Maximum Depth: 813.00 mm
    • Net Weight: 323.18 KG