Universal HDD Dock USB 3.0 - 2.5/3.5in SATA & Ide - Uasp

 Without VATWith VAT
Base Price:€68,64€83,05
Recupel:+ €0,01+ €0,01
Part Number: UNIDOCKU33
Language: US
Minimum Order Quantity: 1

Product Details


The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.

Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.

The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.

A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).

The UNIDOCKU33 is backed by a 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled Enclosure, and a SATA III solid state drive.

The Advantage

- Versatile configuration options, with support for IDE and SATA 2.5in and 3.5in drives
- Save time, with file transfers up to 70% faster than traditional USB 3.0 when used with a UASP-supported host
- Hassle-free operation and reduced workspace clutter, with upright slot-loading design

* Product appearance and specifications are subject to change without notice.


Storage media typeHDD, SSD
Storage drive interfaceIDE, Serial ATA, Serial ATA II, Serial ATA III
Storage drive sizes supported63.5, 88.9 mm (2.5, 3.5")
Number of storage drives supported2
Maximum storage capacity6 TB
DC-in jackYes
Standard interfacesUSB 3.0
Maximum data transfer rate5 Gbit/s
Colour of productBlack
RAID supportNo
Mean time between failures (MTBF)30000h
UASP supportYes
ChipsetJMicron - JMS561U, JMD330
AC input voltage110-240V
Input current1.3A
Output voltage12V
Output current3A
Plug typeType M
Width13 cm
Depth14 cm
Height7 cm
Package dimensions (WxDxH)120 x 185 x 210 mm
Package weight1.3 kg
AC adapter includedYes
Cables includedUSB
LED indicatorsYes
Operating temperature (T-T)5 - 80 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)8 - 90%