The SATDOCK22RE USB and eSATA Standalone Duplicator Dock lets you duplicate/clone an existing hard drive without the use of a host computer system, or can be connected to a computer system for use as an external hard drive dock.
As a hard drive duplicator, you can create an exact 1 to 1 sector clone from one hard drive to another, including partition and boot sector information and all data, at a rate of 72MB/second - ensuring data integrity and consistency for sensitive operations, such as data recovery.
As an external hard drive dock, the duplicator/dock supports plug-and-play installation and can be connected to your host computer through USB 2.0 or eSATA, providing data transfer speeds up to 480Mbps or 3Gbps respectively from the hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer''s storage/backup capabilities.
Not having to install the hard drives into an enclosure or tray system allows for quick setups - a perfect solution for situations that require swapping through multiple drives, which combined with no driver or software installation requirements delivers a convenient and versatile storage solution. The value of this hard drive docking station can be extended, using a (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
Benefits and Features:
|Drive Connectors||SATA Data & Power Combo (7+15 pin) Receptacle|
|Host Connectors||eSATA (7 pin; Data) Plug|
|USB B (4 pin) Female|
|Operating Temperature||5°C to 80°C (41°F to 176°F)|
|Storage Temperature||-40°C to 70°C (-40°F to 158°F)|
|Chipset ID||JMicron - JMB352U|
|Compatible Drive Types (Type and Rate)||SATA|
|Drive Size||2.5in & 3.5in|
|Interface||USB 2.0 & eSATA|
|Number of Drives||2|
|LED Indicators||Drive Status (Blue - drive detected, Red - drive not detected, Flashing Red - Activity)|
|Mode Indicator (Blue - JBOD, Red - Duplication)|
|Power Indicator (Blue)|
|Progress Bar (Blue)|
|Included in Package||eSATA Cable|
|Power Cord (NA/GB/EU)|
|SATA HDD Duplicator Dock|
|Universal Power Adapter|
|USB 2.0 Cable|
|Shipping (Package) Weight||0.8 kg [1.8 lb]|
|Insertion Rating||15,000 cycles|
|Max Drive Capacity||Currently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) and 1TB 5400 RPM 2.5" hard drives (2TB total)|
|Type and Rate||SATA II (3 Gbps)|
|USB 2.0 - 480 Mbit/s|
|Product Height||70 mm [2.8 in]|
|Product Length||147 mm [5.8 in]|
|Product Weight||547 g [19.3 oz]|
|Product Width||132 mm [5.2 in]|
|Input Voltage||110 ~ 240 AC|
|Output Voltage||12/5 DC|
|Power Source||AC Adapter Included|
|OS Compatibility||Windows® 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000|
Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6)
|Special Notes / Requirements|
|Note||For duplication, the destination drive must be of equal or greater capacity than the source drive.|
If the source drive contains an EISA (Extended Industry Standard Architecture) partition, the EISA partition needs to be removed prior to beginning the duplication.
eSATA operation with two hard drives installed, requires an eSATA host controller with Port Multiplier support.