curve_type_3_left_tcurve_type_3_right_t

Ide To SATA Drive Mounted Adapter

 Without VATWith VAT
Base Price:€16,03€19,40
Total:€16,03€19,40
Part Number: IDE2SAT
Language: US
Minimum Order Quantity: 1
Stock

Product Details

Introduction

This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives.

Saving time and hassle, the IDE to SATA adapter can be connected through simple plug and play installation and is backed by StarTech.com''s Lifetime Warranty and free lifetime technical support.

Benefits and Features:

  • Connect a SATA drive to an IDE system without having to install any special drivers or software
  • Backed by a StarTech.com lifetime warranty and free lifetime technical support
  • Connect a SATA device to an IDE/ATA motherboard or controller card
  • Complete hardware solution; no software required
  • Support for 48-bit Logical Block Addressing (LBA)
  • Compliant with SATA revision 1.0 specification
  • Compatible with Ultra ATA 133 specification

Specifications


Connector(s)
Connector Type(s)IDE (40 Pin; EIDE/PATA) Male
SATA Data & Power Combo (7+15 pin) Receptacle
SP4 (4 pin; Small Drive Power) Male
Environmental
Humidity15~90% RH
Operating Temperature5C to 50C (40F to 122F)
Storage Temperature-25C to 80C (-13F to 176F)
Hardware
Chipset IDMarvell - 88SA8052
Package Contents
Included in PackageIDE to SATA adapter
Instruction Manual
LP4 Molex to SP4 Power Cable
Packaging Information
Shipping (Package) Weight0.1 kg [0.2 lb]
Performance
Maximum Data Transfer Rate133MB/sec
Physical Characteristics
Product Height23 mm [0.9 in]
Product Length75.5 mm [3 in]
Product Weight15 g [0.5 oz]
Product Width20 mm [0.8 in]
Special Notes / Requirements
System and Cable RequirementsAn IDE controller and ATA cable (not included).
.