curve_type_3_left_tcurve_type_3_right_t

Vdsl2 Ethernet Extender Kit Over Single Pair Wire 1km 10/100

 Without VATWith VAT
Base Price:€310,54€375,75
Total:€310,54€375,75
Part Number: 110VDSLEXTEU
Language: UK
Minimum Order Quantity: 1
Stock
Add

Product Details

Introduction

The 110VDSLEXTEU VDSL Ethernet extender kit allows you to span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device allows you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.

A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference.

The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat5).

Solution Diagrams:

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Benefits and Features:

  • Provides high speed Ethernet extension over copper telephone line or other existing two pair wiring enabling network connectivity to remote locations up to 1km away
  • Allows network connectivity in buildings made of stone/concrete, or heritage buildings where new Ethernet cabling or wireless are impossible
  • Simple Plug and play installation with no software or driver installation for a hassle-free setup
  • IEEE 802.1Q VLAN tag transparent
  • Selectable CPE and CO mode via DIP switch
  • Supports flow control for Fast Ethernet (pause frame or Back Pressure)
  • Allows you the ability to select fixed SNR margin (9 dB) or fixed target data rate
  • Light in weight and a very compact design
  • Supports both symmetric and asymmetric transmission

Specifications


Connector(s)
Local Unit ConnectorsRJ-45 Female
Remote Unit ConnectorsRJ-45 Female
Environmental
Humidity10~90% RH
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature0°C to 70°C (32°F to 158°F)
Hardware
Industry StandardsIEEE 802.3/802.3u/802.3x 10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X, ITU-T G993.1/993.2 On-board surge protection
Indicators
LED IndicatorsLAN: ACT/LNK, 10/100 Mbps, Half/Full Duplex
VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
Package Contents
Included in PackageEthernet VDSL Extender
Ethernet VDSL Receiver
Instruction Manual
Power Adapter
RJ-45 to VDSL Cable
Packaging Information
Shipping (Package) Weight0.4 kg [0.9 lb]
Performance
Max Distance1 km (0.6 mi)
Maximum Data Transfer Rate0m - 100Mbit/s
300m - 75Mbit/s
1km - 10Mbit/s
Physical Characteristics
ColorBlack
Product Height22 mm [0.9 in]
Product Length95 mm [3.7 in]
Product Weight90 g [3.2 oz]
Product Width72 mm [2.8 in]
Power
Center Tip PolarityPositive
Input Voltage230 AC
Output Current1A
Output Voltage12 DC
Plug TypeM
Power Source2 AC Adapters Included
Special Notes / Requirements
NoteYou have the ability to use up to four sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (Up to two sets only over standard Cat5).
.