curve_type_3_left_tcurve_type_3_right_t

Transceiver X121 1G SFP RJ45 T

 Without VATWith VAT
Base Price:€176,94€214,10
Recupel:+ €0,04+ €0,05
Total:€176,98€214,15
Part Number: J8177C
Language: UK
Minimum Order Quantity: 1
Stock
Add

Introduction

HP X121 1G SFP RJ45 T Transceiver

Specifications


Copyright noticeThe product could differ from the images shown. © 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Specific features may vary from model to model. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DifferentiatorA small form-factor pluggable (SFP) Gigabit copper transceiver that provides a full-duplex Gigabit solution up to 100 m on Category 5 or better cable.
Image legal disclaimerProduct image may differ from actual product
Minimum dimensions (W x D x H)6.88 x 1.37 x 1.4 cm
Operating altitudeup to 3000 km
Operating humidity range0 to 95% @ 75°F (25°C) (noncondensing)
Operating temperature range0 to 70°C
Ports1 RJ-45 1000Base-T port(IEEE 802.3ab Type 1000Base-T), Duplex: full only
Product classification flagStandard HP Product
Product descriptionHP X121 1G SFP RJ45 T Transceiver
Product nameHP X121 1G SFP RJ45 T Transceiver
Product numberJ8177C
Registration requiredNo
Storage humidity0 to 95% @ 77°F (25°C) (noncondensing)
Storage temperature range-40 to 85°C
Tangible flagYes
Technical notesPower consumption is nominally 1 watt.For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports.The J8177C is capable of 100 Mb operation. This is supported on only the HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.Important: The earlier J8177B does not support 100 Mb operation.When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.
UNSPSC code43201553
Weight0.03 kg
.