Cisco Catalyst 3560-cx 8port Poe Ip Base

Introduction

The Cisco® Catalyst® Compact Switches easily expand your Ethernet and Multigigabit Ethernet Cisco Catalyst switching infrastructure outside the wiring closet to enable new workspaces, extend wireless LANs, and connect PoE devices. These fanless, small form-factor switches are ideal for space-constrained deployments where multiple cable runs would be challenging. With speeds that reach 10Gbps, the Cisco Catalyst 3560CX Multigigabit Ethernet Switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure.

The Cisco Catalyst 3560-CX and 2960-CX Series Compact Switches help optimize network deployments. These Gigabit Ethernet (GbE) and Multigigabit Ethernet (mGig) managed switches are ideal for high-speed data connectivity, Wi-Fi backhaul, and Power over Ethernet (PoE+) connectivity in places where space is at a premium. With a single copper or fiber cable from the wiring closet, Cisco Catalyst compact switches enable IP connectivity for devices such as IP phones, wireless access points, surveillance cameras, PCs, and video endpoints.

With their quiet, fanless design and compact footprint, these switches offer flexible mounting options and open up a variety of network design and connectivity options. Use them in offices, classrooms, hotels, retail stores, and other enterprise and branch locations. The setup allows for shorter cable runs from the compact switches, allowing for flexibility in space redesign and growth as new devices join the network - this eliminating the need for expensive and inflexible cabling infrastructure.

Management features

Switch type

Managed

Quality of Service (QoS) support

Y

ARP inspection

Y

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity

8

Basic switching RJ-45 Ethernet ports type

Gigabit Ethernet (10/100/1000)

Gigabit Ethernet (copper) ports quantity

2

SFP module slots quantity

2

Network

Networking standards

IEEE 802.11ac,IEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z

10G support

Y

Copper ethernet cabling technology

10BASE-T,100BASE-TX,1000BASE-T

Full duplex

Y

IP routing

Y

VLAN support

Y

Number of VLANs

4000

Optical fiber

Fiber ethernet cabling technology

100BASE-BX,100BASE-FX,100BASE-LX,1000BASE-X,1000BASE-BX,1000BASE-LH,1000BASE-SX,1000BASE-ZX

Fiber type

Multi-mode

Data transmission

Switching capacity

32 Gbit/s

Forwarding rate

17.9 Mpps

Jumbo frames support

Y

Jumbo frames

9198

Security

DHCP features

DHCP server,DHCP client

Access Control List (ACL)

Y

Security algorithms

802.1x RADIUS,SNMP

SSH/SSL support

Y

Authentication

MAC-based authentication

Multicast features

Multicast support

Y

Design

Rack mounting

Y

Product colour

White

Wall mountable

Y

DIN rail mounting

Y

Safety

UL 60950-1, CAN/CSA 22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CE, GB 4943, IEC 60825

Electromagnetic compatibility

FCC 15, CFR 47, EN 55022 (CISPR22), EN 55024 (CISPR24), CE, AS/NZS, Class A, CISPR22:2004, EN55022, VCCI A, V-3/2007.04, KCC (MIC, GB17625.1-1998) A, KN24/KN22, ANATEL, CCC, China, GOST

Performance

Internal memory

512 MB

Flash memory

128 MB

Mean time between failures (MTBF)

569530 h

Power

AC input voltage

100 - 240 V

Input current

1.5 - 3.25 A

Power consumption (typical)

24.4 W

Power over Ethernet (PoE)

Power over Ethernet (PoE)

Y

Power over Ethernet plus (PoE+) ports quantity

8

Total Power over Ethernet (PoE) budget

240 W

Operational conditions

Operating temperature (T-T)

-5 - 45 °C

Storage temperature (T-T)

-25 - 70 °C

Operating relative humidity (H-H)

5 - 95%

Storage relative humidity (H-H)

5 - 95%

Operating altitude

0 - 3048 m

Non-operating altitude

0 - 4000 m

Heat dissipation

1023.61 BTU/h

Weight & dimensions

Width

269 mm

Depth

238 mm

Height

44.4 mm

Weight

2.27 kg